GMA provides a number of pumps for the inflation of inflatable packers, both for disposable and reusable packers.
Pumps are available as hand pumps or electric pumps and are supplied with a quick coupling to a 6 or 8 mm plastic hose (std. 6mm, if 8mm need to be stated in combination with order).
Note that reusable inflatable packers should be inflated with clean water, not air or gas. Water should also be pumped in at a relatively low flow rate, especially for disposable packers; grouting pumps cannot be used (and no grout mix).
GMA standard hand pump, 60 Bars model made of sheet metal and weighing 7.8 kg. The sheet metal container holds 12 liters of water.
Supplied complete with quick connector for 6mm plastic hose (8mm on request).
| GMA Part number |
Type | PN (Bar) |
| 81501-1 | Standard hand pump | 60 |
A lightweight pump (6.4kg) with a plastic container that holds 13.5 liters.
Complete with quick connector for 6mm plastic hose (8mm on request).
Pumps 38cm3 / pump stroke.
| GMA Part number |
Type | PN (Bar) |
| 81501 | Lightweight hand pump | 50 |
Electric pump for 60 bar where the pump unit is equipped with a 3-piston ceramic pump unit for long life.
The stainless-steel reservoir of the pump holds 12 liters, and the capacity of the pump is 9 l/min.
The control block (pressure gauge stand) on the pump is interchangeable.
| GMA Part number |
Type | PN (Bar) |
| 81502-60 | Electric pump for inflatable packer | 60 |
Extra control block to electric pump. Converts 40 bar pumps to 60 bar version.
Exchange of control block without tools (push-in coupling). Control block can be left without electric pump to check ev. leakege.
| GMA Artikelnummer | Typ | PN (Bar) |
| 81502-60Bar | 60 Bar |
